UNTAPPED PASSIVE DELAY LINES
 7SIPF-XXXX
7-Pin
SIP Untapped Passive Delay Line
- Analog input and output
- Delays stable and precise
- 7-pin SIP package (.230 high)
- Available in delays from 1 to 250ns
- Precise, fixed delay
- Available in impedances of 50, 100 and 2000 ohms
DESIGN NOTES
The "SIP Series" Lumped Constant Passive Delay Lines developed by Engineered Components Company have been designed to provide precise delays for analog delay line applications. These delay lines provide excellent delay accuracy, low DCR, low attenuation and low distortion.
These delay lines are offered in 132 models with delays from 1 to 250ns. Delay time is measured at the 50% point on the leading edge. Accuracies are maintained as shown under "Operating Characteristics." Temperature coefficient of delay is less than 75 ppm/°C over the operating temperature range of -55 to +125°C.
"SIP Series" LC delay lines are intended for use in most analog applications; they are also compatible with the low signal levels of TTL and ECL. These delay lines find extensive use in providing the required delay timing functions necessary in radar, computer, communications, testing and instrument applications.
Construction of the "SIP Series" utilizes miniature inductors and monolithic ceramic capacitors to provide the utmost in miniaturization and reliability. The MTBF on these delay lines, when calculated per MIL-HDBK-217, for a 50°C ground fixed environment and with 5V DC applied, is in excess of 12 million hours.
The "SIP Series" delay lines
are packaged in a 7-pin SIP housing, molded of flameproof
Diallyl Phthalate per ASTM D 5948, Type SDG-F. These delay
lines are designed to meet the applicable portions of MIL-D-23859,
and they are capable of meeting the environmental requirements
of MIL-STD-202 for moisture resistance, vibration, temperature
cycling, humidity and life. Flat metal leads meet the solderability
requirements of MIL-STD-202, Method 208. Corner standoffs
on the housing provide positive standoff from the printed
circuit board to permit solder-fillet formation and flush
cleaning of solder-flux residues for improved reliability.
Marking consists of manufacturer's name, part number, terminal identification and date code of manufacture. All marking is applied by silk screen process using white epoxy paint in accordance with MIL-STD-130, to meet the permanency of identification required by MIL-STD-202, Method 215.
TEST CONDITIONS
1. All measurements are made at 25°C.
2. Test procedures in accordance with MIL-D-23859.
OPERATING CHARACTERISTICS
Total delay tolerance: ............. See tabulations
Rise time, maximum: ................ See tabulations
Impedance: ......................... 50, 100 or
200 ohms
Impedance tolerance: ............... @10%
DC resistance, maximum: ............ See tabulations
Attenuation, maximum: .............. 0.5 db
Distortion, maximum: ............... ± 5%
Overshoot, maximum: ................ 10%
Working voltage, maximum: .......... 25V DC
Dielectric strength: ............... 100V DC @ 50uA
Insulation resistance, minimum: .... 10,000 megohms
@ 100V DC
|
PART NUMBER TABLE
Part
Number |
Delay
Time (ns) |
Rise
Time (ns) |
Impedance
(ohms) |
DCR
(ohms) |
7SIPF-501
7SIPF-502
7SIPF-503
7SIPF-504
7SIPF-505
7SIPF-506
7SIPF-507
7SIPF-508
7SIPF-509
7SIPF-510
7SIPF-512
7SIPF-514
7SIPF-516
7SIPF-518
7SIPF-520
7SIPF-522
7SIPF-524
7SIPF-526
7SIPF-528
7SIPF-530
7SIPF-535
7SIPF-540
7SIPF-545
7S[PF-550
7SIPF-560
7SIPF-570
7SIPF-580
7SIPF-590
7SIPF-5100
7SIPF-5110
7SIPF-5120
7SIPF-5130
7SIPF-5140
7SIPF-5150
7SIPF-5160
7SIPF-5170
7SIPF-5180
7SIPF-5190
7SIPF-5200
7SIPF-5210
7SIPF-5220
7SIPF-5230
7SIPF-5240
7SIPF-5250
7SIPF-1001
7SIPF-1002
7SIPF-1003
7SIPF-1004
7SIPF-1005
7SIPF-1006
7SIPF-1007
7SIPF-1008
7SIPF-1009
7SIPF-1010
7SIPF-1012
7SIPF-1014
7SIPF-1016
7SIPF-1018
7SIPF-1020
7SIPF-1022
7SIPF-1024
7SIPF-1026
7SIPF-1028
7SIPF-1030
7SIPF-1035
7SIPF-1040
7SIPF-1045
7SIPF-1050
7SIPF-1060
7SIPF-1070
7SIPF-1080
7SIPF-1090
7SIPF-10100
7SIPF-10110
7SIPF-10120
7SIPF-10130
7SIPF-10140
7SIPF-10150
7SIPF-10160
7SIPF-10170
7SIPF-10180
7SIPF-10190
7SIPF-10200
7SIPF-10210
7SIPF-10220
7SIPF-10230
7SIPF-10240
7SIPF-10250
7SIPF-2001
7SIPF-2002
7SIPF-2003
7SIPF-2004
7SIPF-2005
7SIPF-2006
7SIPF-2007
7SIPF-2008
7SIPF-2009
7SIPF-2010
7SIPF-2012
7SIPF-2014
7SIPF-2016
7SIPF-2018
7SIPF-2020
7SIPF-2022
7SIPF-2024
7SIPF-2026
7SIPF-2028
7SIPF-2030
7SIPF-2035
7SIPF-2040
7SIPF-2045
7SIPF-2050
7SIPF-2060
7SIPF-2070
7SIPF-2080
7SIPF-2090
7SIPF-20100
7SIPF-20110
7SIPF-20120
7SIPF-20130
7SIPF-20140
7SIPF-20150
7SIPF-20160
7SIPF-20170
7SIPF-20180
7SIPF-20190
7SIPF-20200
7SIPF-20210
7SIPF-20220
7SIPF-20230
7SIPF-20240
7SIPF-20250 |
1 ±0.2
2 ±0.2
3 ±0.3
4 ±0.4
5 ±0.5
6 ±0.5
7 ±0.5
8 ±0.6
9 ±0.6
10 ±0.7
12 ±0.7
14 ±0.8
16 ±0.8
18 ±1.0
20 ±1.0
22 ±1.0
24 ±1.0
26 ±1.2
28 ±1.2
30 ±1.5
35 ±1.5
40 ±2.0
45 ±2.0
50 ±2.5
60 ±2.5
70 ±3.0
80 ±3.0
90 ±4.0
100 ±4.0
110 ±4.5
120 ±4.5
130 ±5.0
140 ±5.0
150 ±5.5
160 ±5.5
170 ±6.0
180 ±6.0
190 ±7.0
200 ±8.0
210 ±8.5
220 ±9.0
230 ±9.5
240 ±10.0
250 ±10.0
1 ±0.2
2 ±0.2
3 ±0.3
4 ±0.4
5 ±0.5
6 ±0.5
7 ±0.5
8 ±0.6
9 ±0.6
10 ±0.7
12 ±0.7
14 ±0.8
16 ±0.8
18 ±1.0
20 ±1.0
22 ±1.0
24 ±1.0
26 ±1.2
28 ±1.2
30 ±1.5
35 ±1.5
40 ±2.0
45 ±2.0
50 ±2.5
60 ±2.5
70 ±3.0
80 ±3.0
90 ±4.0
100 ±4.0
110 ±4.5
120 ±4.5
130 ±5.0
140 ±5.0
150 ±5.5
160 ±5.5
170 ±6.0
180 ±6.0
190 ±7.0
200 ±8.0
210 ±8.5
220 ±9.0
230 ±9.5
240 ±10.0
250 ±10.0
1 ±0.2
2 ±0.2
3 ±0.3
4 ±0.4
5 ±0.5
6 ±0.5
7 ±0.5
8 ±0.6
9 ±0.6
10 ±0.7
12 ±0.7
14 ±0.8
16 ±0.8
18 ±1.0
20 ±1.0
22 ±1.0
24 ±1.0
26 ±1.2
28 ±1.2
30 ±1.5
35 ±1.5
40 ±2.0
45 ±2.0
50 ±2.5
60 ±2.5
70 ±3.0
80 ±3.0
90 ±4.0
100 ±4.0
110 ±4.5
120 ±4.5
130 ±5.0
140 ±5.0
150 ±5.5
160 ±5.5
170 ±6.0
180 ±6.0
190 ±7.0
200 ±8.0
210 ±8.5
220 ±9.0
230 ±9.5
240 ±10
250 ±10 |
2.0
2.3
2.7
3.0
3.3
3.7
4.0
4.3
4.7
5.0
5.7
6.5
7.0
7.7
8.5
9.0
10.0
10.5
11.0
12.0
13.5
15.0
16.5
18.5
22.0
25.0
28.0
32.0
35.0
38.0
42.0
45.0
48.0
51.0
55.0
58.0
61.0
65.0
68.0
71.0
75.0
78.0
81.0
84.0
2.0
2.3
2.7
3.0
3.4
3.7
4.0
4.4
4.7
5.0
5.7
6.4
7.1
7.8
8.5
9.1
9.8
10.5
11.0
12.0
13.5
15.0
16.5
18.5
22.0
25.0
28.0
32.0
35.0
38.0
42.0
45.0
48.0
51.0
55.0
58.0
61.0
65.0
68.0
71.0
75.0
78.0
81.0
84.0
2.5
2.8
3.1
3.5
3.8
4.1
4.4
4.7
5.0
5.3
6.0
6.6
7.2
7.9
8.5
9.1
9.8
10.5
11.0
12.0
13.5
15.0
16.5
18.5
22.0
25.0
28.0
32.0
35.0
38.0
42.0
45.0
48.0
51.0
55.0
58.0
61.0
65.0
68.0
71.0
75.0
78.0
81.0
84.0 |
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200 |
0.2
0.3
0.4
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.8
0.8
0.8
1.0
1.1
1.1
1.1
1.2
1.2
1.4
1.6
2.6
2.6
2.8
3.0
3.2
3.5
5.2
5.6
5.6
5.8
5.8
6.8
6.8
6.8
7.0
7.5
7.5
8.0
8.0
8.0
8.0
8.0
8.0
0.2
0.3
0.4
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.8
0.8
0.8
1.0
1.1
1.1
1.1
1.2
1.2
1.4
1.6
2.6
2.6
2.8
3.0
3.2
3.5
5.2
5.6
5.6
5.8
5.8
6.8
6.8
6.8
7.0
7.5
7.5
8.0
8.0
8.0
8.0
8.0
8.0
0.2
0.3
0.4
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.8
0.8
0.8
1.0
1.1
1.1
1.1
1.2
1.2
1.4
1.6
2.6
2.6
2.8
3.0
3.2
3.5
5.2
5.6
5.6
5.8
5.8
6.8
6.8
6.8
7.0
7.5
7.5
8.0
8.0
8.0
8.0
8.0
8.0 |
Special delay lines can be readily manufactured with longer or specific delays, impedances, rise times and package configurations for specific applications.
|
